Availability: | |
---|---|
Quantity: | |
C276
Alloy C276 nickel alloy plate (UNS N10276) is an austenitic nickel-molybdenum-chromium alloy with a small addition of tungsten. It is one of the premier corrosion resistant materials available for process industries. Alloy C276 nickel alloy plate has excellent corrosion resistance in both oxidizing and reducing environments.
The combination of the high molybdenum and chromium content, along with the addition of tungsten, make Alloy C276 nickel alloy plate highly resistant to chloride stress corrosion cracking, pitting, crevice corrosion and general corrosion.
Alloy C276 nickel alloy plate can operate in oxidizing atmospheres up to 1900oF (1038oC), however, the alloy lacks sufficient chromium content to operate successfully in the most strongly oxidizing environments like hot, concentrated nitric acid.
The low carbon content of Alloy C276 nickel alloy plate enables the alloy to be utilized in the as-welded condition. It cannot be hardened by heat treatment, but can be hardened by cold working. The alloy has a higher work-hardening rate than the austenitic stainless steels which should be taken into consideration.
Alloy C276 nickel alloy plate can be easily welded and processed utilizing standard shop fabrication practices for austenitic stainless steels and nickel based alloys.
We are ISO 9001:2008 certified company with more than 20 years steel experience & have exported to countries such as Argentina, Australia, Canada , Chile, Mexico , Colombia, Denark , Norway, Finland, Germany, UAE, France, Vietnam, Brazil, America, Hungary, Sri Lanka, Malaysia, Saudi Arabia, Thailand, Indonesia, India, Iraq, Kuwait , Isreal, Lebanon,Morocco, Iran, Taiwan, Singapore, Qatar, Japan, Spain, Italy, Peru, South Korea, Turkey,Russia ,Philippines, Rome, England etc.
If there is any questions , pls do not hesitate to contact us !
Mr.Jim
Mobile/Wechat : +86 15902911689
Email : info@yklsteel.com
Alloy C276 nickel alloy plate (UNS N10276) is an austenitic nickel-molybdenum-chromium alloy with a small addition of tungsten. It is one of the premier corrosion resistant materials available for process industries. Alloy C276 nickel alloy plate has excellent corrosion resistance in both oxidizing and reducing environments.
The combination of the high molybdenum and chromium content, along with the addition of tungsten, make Alloy C276 nickel alloy plate highly resistant to chloride stress corrosion cracking, pitting, crevice corrosion and general corrosion.
Alloy C276 nickel alloy plate can operate in oxidizing atmospheres up to 1900oF (1038oC), however, the alloy lacks sufficient chromium content to operate successfully in the most strongly oxidizing environments like hot, concentrated nitric acid.
The low carbon content of Alloy C276 nickel alloy plate enables the alloy to be utilized in the as-welded condition. It cannot be hardened by heat treatment, but can be hardened by cold working. The alloy has a higher work-hardening rate than the austenitic stainless steels which should be taken into consideration.
Alloy C276 nickel alloy plate can be easily welded and processed utilizing standard shop fabrication practices for austenitic stainless steels and nickel based alloys.
We are ISO 9001:2008 certified company with more than 20 years steel experience & have exported to countries such as Argentina, Australia, Canada , Chile, Mexico , Colombia, Denark , Norway, Finland, Germany, UAE, France, Vietnam, Brazil, America, Hungary, Sri Lanka, Malaysia, Saudi Arabia, Thailand, Indonesia, India, Iraq, Kuwait , Isreal, Lebanon,Morocco, Iran, Taiwan, Singapore, Qatar, Japan, Spain, Italy, Peru, South Korea, Turkey,Russia ,Philippines, Rome, England etc.
If there is any questions , pls do not hesitate to contact us !
Mr.Jim
Mobile/Wechat : +86 15902911689
Email : info@yklsteel.com
Chemical Analysis of Alloy C276 (UNS N10276) :
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | W | V |
.01 max | 1.00 max | .04 max | .03 max | .08 max | 14.5 -16.5 | rem | 15.0 - 17.0 | 2.5 max | 4.0 - 7.0 | 3.0 - 4.5 | .35 max |
Mechanical Properties : Typicals Values at 68°F (20°C)
Yield Strength | Ultimate Tensile | Elongation | Hardness | ||
psi (min.) | (MPa) | psi (min.) | (MPa) | % (min.) | (max.) |
41,000 | 283 | 100,000 | 690 | 40 | 100 Rockwell B |
Mean Coefficient of Thermal Expansion - Temperature Range
°F | °C | in/in/°F | cm/cm°C |
200 | 93 | 6.8 x 10-6 | 12.24 x 10-6 |
400 | 204 | 7.0 x 10-6 | 12.60 x 10-6 |
600 | 316 | 7.2 x 10-6 | 12.96 x 10-6 |
800 | 427 | 7.4 x 10-6 | 13.32 x 10-6 |
1000 | 538 | 7.8 x 10-6 | 14.0 x 10-6 |
1200 | 649 | 8.2 x 10-6 | 14.8 x 10-6 |
1400 | 760 | 8.5 x 10-6 | 15.3 x 10-6 |
1600 | 871 | 8.8 x 10-6 | 15.8 x 10-6 |
1700 | 927 | 9.0 x 10-6 | 16.2 x 10-6 |
Chemical Analysis of Alloy C276 (UNS N10276) :
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | W | V |
.01 max | 1.00 max | .04 max | .03 max | .08 max | 14.5 -16.5 | rem | 15.0 - 17.0 | 2.5 max | 4.0 - 7.0 | 3.0 - 4.5 | .35 max |
Mechanical Properties : Typicals Values at 68°F (20°C)
Yield Strength | Ultimate Tensile | Elongation | Hardness | ||
psi (min.) | (MPa) | psi (min.) | (MPa) | % (min.) | (max.) |
41,000 | 283 | 100,000 | 690 | 40 | 100 Rockwell B |
Mean Coefficient of Thermal Expansion - Temperature Range
°F | °C | in/in/°F | cm/cm°C |
200 | 93 | 6.8 x 10-6 | 12.24 x 10-6 |
400 | 204 | 7.0 x 10-6 | 12.60 x 10-6 |
600 | 316 | 7.2 x 10-6 | 12.96 x 10-6 |
800 | 427 | 7.4 x 10-6 | 13.32 x 10-6 |
1000 | 538 | 7.8 x 10-6 | 14.0 x 10-6 |
1200 | 649 | 8.2 x 10-6 | 14.8 x 10-6 |
1400 | 760 | 8.5 x 10-6 | 15.3 x 10-6 |
1600 | 871 | 8.8 x 10-6 | 15.8 x 10-6 |
1700 | 927 | 9.0 x 10-6 | 16.2 x 10-6 |
Air Pollution Control – flue gas desulfurization systems – stack liners, absorbers, ducts, dampers, stack gas re-heaters and fans
Chemical Processing – heat exchangers, pressure vessels, tanks, evaporators, piping, flanges and fittings, pumps and valves
Oil and Gas Production – sour gas service components
Pharmaceutical Production – reactor vessels, piping, flanges and fittings, pumps and valves
Pulp and Paper – bleaching vessels and digesters
Waste Treatment – incinerators for toxic, industrial and municipal waste
Ore Processing
Air Pollution Control – flue gas desulfurization systems – stack liners, absorbers, ducts, dampers, stack gas re-heaters and fans
Chemical Processing – heat exchangers, pressure vessels, tanks, evaporators, piping, flanges and fittings, pumps and valves
Oil and Gas Production – sour gas service components
Pharmaceutical Production – reactor vessels, piping, flanges and fittings, pumps and valves
Pulp and Paper – bleaching vessels and digesters
Waste Treatment – incinerators for toxic, industrial and municipal waste
Ore Processing