Availability: | |
---|---|
Quantity: | |
304L
304L Stainless Steel Sheet
Type 304L is a lower carbon variant of Grade 304 – the steel can be welded without the resulting issue of carbon precipitation (precipitation of chromium carbide as heat is applied during the welding process which depletes the chromium element of the steel thus reducing its anti-corrosive/oxidation effectiveness).
As a result, Type 304L stainless steel is a sort after material for use in severely corrosive conditions. Weld annealing is only necessary in applications where stress loads are excessive.
This steel Grade is found in a variety of commercial sectors, particularly in the chemical industry.
Surface Finished Of Stainless Steel Sheet :
Surface finish | Characteristics & Application |
NO 1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. |
2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
#320 | Polished with abrasive belt of grit #320, have better brightness with discontinuous coarse stria, but thinner NO.3, are used as bathtub building inner and external ornaments electrical appliances kitchen utensils and food lprocessing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin-passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc |
We are ISO 9001:2008 certified company with more than 20 years steel experience & have exported to countries such as Argentina, Australia, Canada , Chile, Mexico , Colombia, Denark , Norway, Finland, Germany, UAE, France, Vietnam, Brazil, America, Hungary, Sri Lanka, Malaysia, Saudi Arabia, Thailand, Indonesia, India, Iraq, Kuwait , Isreal, Lebanon,Morocco, Iran, Taiwan, Singapore, Qatar, Japan, Spain, Italy, Peru, South Korea, Turkey,Russia ,Philippines, Rome, England etc.
If there is any questions , pls do not hesitate to contact us !
Mr.Jim
Mobile/Wechat : +86 15902911689
Email : info@yklsteel.com
304L Stainless Steel Sheet
Type 304L is a lower carbon variant of Grade 304 – the steel can be welded without the resulting issue of carbon precipitation (precipitation of chromium carbide as heat is applied during the welding process which depletes the chromium element of the steel thus reducing its anti-corrosive/oxidation effectiveness).
As a result, Type 304L stainless steel is a sort after material for use in severely corrosive conditions. Weld annealing is only necessary in applications where stress loads are excessive.
This steel Grade is found in a variety of commercial sectors, particularly in the chemical industry.
Surface Finished Of Stainless Steel Sheet :
Surface finish | Characteristics & Application |
NO 1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. |
2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
#320 | Polished with abrasive belt of grit #320, have better brightness with discontinuous coarse stria, but thinner NO.3, are used as bathtub building inner and external ornaments electrical appliances kitchen utensils and food lprocessing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin-passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc |
We are ISO 9001:2008 certified company with more than 20 years steel experience & have exported to countries such as Argentina, Australia, Canada , Chile, Mexico , Colombia, Denark , Norway, Finland, Germany, UAE, France, Vietnam, Brazil, America, Hungary, Sri Lanka, Malaysia, Saudi Arabia, Thailand, Indonesia, India, Iraq, Kuwait , Isreal, Lebanon,Morocco, Iran, Taiwan, Singapore, Qatar, Japan, Spain, Italy, Peru, South Korea, Turkey,Russia ,Philippines, Rome, England etc.
If there is any questions , pls do not hesitate to contact us !
Mr.Jim
Mobile/Wechat : +86 15902911689
Email : info@yklsteel.com
304 & 304L plate and pipes have similar properties and in certain cases are stocked with Dual Certification, where it is concluded that each item has properties and a composition which comply with both steel types. Grade 304H cannot be included in this equation due to the steel's higher carbon content which is intended for use in elevated temperature applications.
Chemical Composition
UNS No | Grade | C | Si | Mn | P | S | Cr | Mo | Ni | N |
S30403 | 304L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 18.00/20.00 | – | 8.00/12.00 | 0.10 |
Mechanical Properties
UNS No | Grade | Proof Stress | Tensile Strength | Elongation | Hardness Max | |
HB | HRB | |||||
S30403 | 304L | 170 | 485 | 40 | 201 | 92 |
We stock 304L stainless steel and can globally supply this material to you – to find out more or to receive a competitive quotation please contact us.
304 & 304L plate and pipes have similar properties and in certain cases are stocked with Dual Certification, where it is concluded that each item has properties and a composition which comply with both steel types. Grade 304H cannot be included in this equation due to the steel's higher carbon content which is intended for use in elevated temperature applications.
Chemical Composition
UNS No | Grade | C | Si | Mn | P | S | Cr | Mo | Ni | N |
S30403 | 304L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 18.00/20.00 | – | 8.00/12.00 | 0.10 |
Mechanical Properties
UNS No | Grade | Proof Stress | Tensile Strength | Elongation | Hardness Max | |
HB | HRB | |||||
S30403 | 304L | 170 | 485 | 40 | 201 | 92 |
We stock 304L stainless steel and can globally supply this material to you – to find out more or to receive a competitive quotation please contact us.
It is been typically used for Off Shore Oil Drilling, Power generation, Petrochemical, Gas Processing, Pharmaceutical Equipment, Chemical Equipment, Heat Ex changers, Paper & Pulp Industry.
It is been typically used for Off Shore Oil Drilling, Power generation, Petrochemical, Gas Processing, Pharmaceutical Equipment, Chemical Equipment, Heat Ex changers, Paper & Pulp Industry.